|Application:||Loading Work In Steel Factory||Power Supply:||380V 50Hz Or On Request|
|Maximum Lifting Height:||18M||Span:||31.5m|
|Working Cllass:||A6, A7||Color:||Red Yellow (customizable)|
|Lifting Speed:||5~15M/min||Product Name:||New|
overhead lifting equipment,
double beam overhead crane
Theelectromagnet bridge crane with carrier beam transports ladles filled with molten iron to the basic oxygen furnace (BOF), or molten steel from the BOF and electric arc furnace to the continuous casting machine. It can also be used for teeming and casting. As with the charging crane, safety and reliability come first with this crane since it is used to transport molten steel. To ensure the safe operation, it is forbidden to transport scorching iron blocks, as the high temperature steel couldn’t be magnetized.
Safety of Steel Factory Use 10ton ~ 50ton electromagnet bridge crane with carrier beam:
Main lifting motor with thermal protection,
Hooks with latch,
Crane switch and travel end switch,
Emergency switch can stop all movement when any dangerous happened,
Sub-assemblies characteristic are tested before assemly.
All crane must be pre-assmebled and tested before leaving factory and offer the certification of test.
Sketch Drawing of Steel Factory Use 10ton ~ 50ton electromagnet bridge crane with carrier beam:
Technical Parameters of Steel Factory Use 10ton ~ 50ton electromagnet bridge crane with carrier beam
|Span||m||10.5 13.5 16.5 19.5 22.5 25.5 28.5 31.5|
|Max. Lift height||m||16m|
|Trolley traveling||92.7 /93.7||92.7 /93.7/ 86.4||76 /89|
|Attracting weight kg||KG||3330||8330||14330|
|Dead weight kg||1670||1670||1670|
|Steel track recommended||43kg/m|
|Power supply||3-phase A.C. 50HZ 380V|
Contact Person: Lisa Jian